Product Description


GARAGE DOOR STRIP BRUSH – TOP AND SIDE SEALS

UPDATE – Australian Standards AS 3959-2018 Construction of buildings in bushfire-prone areas – we have confirmed via independent testing our Fire Retardant Strip Brush meets the requirements for homes in BAL rated zones 12.5 up to and including BAL FZ. 

Protect your home from bush fire Ember Attack with our Fire Retardant Garage Brush Seals.  Complies with AS 3959-2018 for BAL – Bush fire attack levels 12.5, 19, 29, 40 and FZ.

Easy to DIY install to or around your Garage Door to seal up gaps to 2mm as per AS 3959-2018 Construction of buildings in bushfire-prone areas.

Suitable to help protect from dust, leaves, draughts, birds and insects.  Helps to keep your garage, home workshop or mancave cooler in summer and warmer in winter.

TOP SEAL

2 options available:

Option A45 – 45 degree Holder – For mounting under the Lintel (or frame), with the bristle just touching the Garage Door when closed.  Can be mounted with the bristle angled upward or downward depending on the movement of your garage door. Suitable for your Roller Door, Sectional or Panel Door.

Option B25 – 25 degree Holder – (SUITABLE FOR GARAGE ROLLER DOORS ONLY) For mounting directly to the outside of the Garage Door.  Fit onto the outer corrugation so that the channel and Brush Strip sits neatly into an inner corrugation.  The Brush Strip rolls up neatly with the Roller Door.  Unfolds when the Roller Door closes and the bristle settles behind the Lintel to create the seal.

SIDE SEAL

For Ember Seal Side Seals we recommend you consider fixing the brush strip to the front of the garage door surround, on the outside of the opening.  The 45 degree Angle Aluminium Holder and 25mm bristle may help reduce the impact of a potential ember attack by acting as a barrier to entry into your garage.  The Roller Door Guides then might protect as a 2nd line of defence. Small particles may be repelled from the Strip Brush Seal fitted to the front of the Garage Door.

Single Garage Kit –

Our Kit covers garage doors up to 3000mm wide and 3000mm wide.

Option S50 – Covers up to a 50mm gap

Option S75 – Covers up to a 75mm gap

Top Seal Contains:

  • 2 x 1500mm Anodized Aluminium Holder with 45-degree or 25-degree profile
  • 2 x 1500mm Fire Retardant Strip Brush in 4mm ZincSeal backing with 50mm, or 75mm Nylon bristle length
  • Fixings – 10 x Steel Screws

Side Seals Contains:

  • 4 x 1500mm Anodized Aluminium Holder with 45-degree profile
  • 4 x 1500mm Nylon66 Strip Brush in 4mm ZincSeal backing with 25mm Bristle Length
  • Fixings – 20 x Masonry Screws

Double Garage Kit –

Our Kit covers garage doors up to 6000mm wide and 3000mm wide.

Option D50 – Covers up to a 50mm gap

Option D75 – Covers up to a 75mm gap

Top Seals Contains:

  • 4 x 1500mm Anodized Aluminium Holder with 45-degree or 25-degree profile
  • 4 x 1500mm Fire Retardant Strip Brush in 4mm ZincSeal backing with 50mm or 75mm bristle length
  • Fixings – 20 x Steel Screws

Side Seals Contains:

  • 4 x 1500mm Anodized Aluminium Holder with 45-degree profile
  • 4 x 1500mm Fire Retardant Strip Brush in 4mm ZincSeal backing with 25mm Bristle Length
  • Fixings – 20 x Masonry Screws

NB. FOR GAPS LARGER THAN 75mm WE RECOMMEND OUR 9MM INDUSTRIAL STRIP BRUSH OPTIONS.  You may also need to consult with your local Garage Door Service professional who may be able to adjust the door to reduce the size of the gap.


  • Designed and made in Australia, and has the seal of the Australian Made Campaign licence
  • Larger 4mm backing thickness which provides a fuller and dense coverage
  • Easy to install to your Garage Door to stop dust, leaves and insects flying in over the top of the Roller Door
  • Anodized Aluminium Holders can be painted with an Etch Primer and Colorbond colours to match your Garage Door
  • Can be mounted using Steel Screws or Rivets, and Masonry Screws for mounting Side Seals to brickwork
  • If there are corrugations in your Roller Door, the bristle needs to touch the outer corrugation of the door to create the seal
  • Check that the brush mounting will not impact the mechanism of the Garage Door
  • If unsure, talk to your local Garage Door maintenance professional, or your Building Construction Consultant
  • Heavy duty packaging to handle shipping to all parts of Australia
Download Our Strip Brush & Door Seals Brochure Click here for our FAQs Click here for our 4mm Residential Sample Pack

See our other product listings. We have Kits available for Sectional and Panel Lift Doors (Type “Sectional” in our Search Box), or you can mix and match with our “Choose your options” product listing (type “4mm” in our Search Box). Sample Kits are available to purchase so you can “try before you buy”

We have a full range of Aluminium Holders and Nylon66 Brush Strips suitable for most domestic Garage doors, including Roller Doors, Panel Doors, Tilt Doors and Sectional Doors.  Suitable for top and bottom seal, and side seals.

Also available in 9mm backing thickness for larger or more Industrial applications.  Refer to our Product Brochure for Brush and Holder sizes.

Sample Pack Choose Your Options Industrial Strip Brush Sectional and Panel Door Kit

 


Australia Post Shipping Is NOT available for lengths above 1 metre. Australia-Wide Flat Rate shipping available.

Please supply a physical address and contact number as our couriers cannot deliver to a PO Box.   Please also specify any special instructions for our Courier, eg. leave at side door if not at home.  Thank you.


 

Reviews

There are no reviews yet.

Be the first to review this product

Your Rating