Product Description

DIXBRO RUN OUT STOCK – while stocks last (MAXIMUM 5 ITEMS PER ORDER)

We have a limited range of BRASS and STEEL  Condensor Tube Brushes in 3/16″ or 5/16″ BSW male ferrule fitting available at heavily discounted prices.

Available sizes:

Brass:

  • 6mm diameter – 3/16″inch BSW Ferrule
  • 8mm diameter – 3/16″inch BSW Ferrule
  • 11mm diameter – 5/16″inch BSW Ferrule
  • 13mm diameter – 5/16″inch BSW Ferrule
  • 14mm diameter – 5/16″inch BSW Ferrule
  • 16mm diameter – 5/16″inch BSW Ferrule

Steel:

  • 6mm diameter – 3/16″inch BSW Ferrule
  • 9mm diameter – 3/16″inch BSW Ferrule
  • 10mm diameter – 3/16″inch BSW Ferrule
  • 10mm diameter – 5/16″inch BSW Ferrule
  • 11mm diameter – 5/16″inch BSW Ferrule
  • 13mm diameter – 5/16″inch BSW Ferrule
  • 14mm diameter – 5/16″inch BSW Ferrule
  • 16mm diameter – 5/16″inch BSW Ferrule
  • 19mm diameter – 5/16″inch BSW Ferrule

A Condensor Tube Brush can be used for cleaning pipes, tubes, and bottles. Our Condensor Tube Brushes are great for general cleaning and removal of rust and scale from thin section tubing and access to small, hard to reach blind areas.

Attributes:

Brass Attributes:

  • Made from 39 gauge brass (non ferrous) wire
  • 120mm brush head length, overall length 210mm
  • Suitable for manual use, slow revolution drill, or other flexible shaft equipment

Choosing the right brush?

Generally, it is best to match the brush to your application.  Condenser Tube brushes are less aggressive than it’s Boiler Tube Brush counterpart and can be used on most surfaces.

The Brass Condenser Tube brush are softer than Steel or Stainless Steel wires and is less likely to scratch harder metals.  Ideal for brass or copper surfaces and is non-sparking.  Please contact us to discuss your particular application.

Steel Attributes:

  • Made from 41 gauge steel wire
  • Single twist on sizes 6mm – 13mm, double twist on the larger sizes
  • 130mm brush head length
  • Threaded End with 3/16 inch BSW Ferrule fitted to the smaller sizes, 5/16 inch BSW Ferrule for greater strength in the larger sizes
  • Suitable for manual use, slow revolution drill, or other flexible shaft equipment

Choosing the right brush?

Generally, it is best to match the brush to your application. The Steel Condensor Tube brush should be used for ferrous metal tubes or pipes. Small production runs our specialty. Please contact us to discuss your particular application.

 

NOTE – LIMITED STOCK NUMBERS AVAILABLE – ONCE DIXBRO STOCK HAS BEEN EXHAUSTED YOUR ORDER WILL BE TOPPED UP WITH SUITABLE ALTERNATIVE STOCK.

 

Reviews

There are no reviews yet.

Be the first to review this product

Your Rating